C40 Red

An enhanced modular solution with extra fire protection

The C40 Red modular system gives you all the comforts and quality of a permanent building with the freedom to customize it to your needs. It's ideally suited for classrooms, offices and any situation where both comfort and function are top priorities.

The C40 Red is using different inner walls and exterior material than the standard C40 giving improved fire protection capacity. The units can be built up to three stories high and the modules can be placed very close to existing buildings due to its' improved fire safety.

With high ceilings and plenty of floor space, your new rooms inspire a fresh and open feeling. The C40 Red system offers many interior design options to create an atmosphere people are happy to spend long stretches in.

These top quality modules are among the best on the market in terms of materials, build quality and range of functionality. They are typically rented for two to three years, if not longer.

The indoor environment is kept pleasant with efficient ventilation and heating and cooling (on request) as needed.

If the C40 RED sounds like the right system for you, get in touch to learn how to get started.

All Images

Product Facts

Water and sewers

System Description. External cold water is connected to a console-mounted water meter with turn-off valves in the technology room. Water is then fed to sanitary installations in the C-modules through external piping. The C-module is prepared for the installation of an optional kitchen or sink. Standard toilets and washstands. If electric heating is used, hot water is supplied by a 55 liter water heater in the maintenance room, alternatively, in the technology room. The spill-water piping is situated in the floor structure with a common external connection under the technology room.

Ventilation

System description. Fan-governed in- and outgoing air flow with a rotary heat exchanger for energy recovery. The ventilation equipment is placed in the technology room of the C module. Alternatively, the machinery can be externally mounted or individual machinery be installed in each classroom. Outgoing air is transferred from overhead vents to the corridor roof cover. The air is evacuated centrally at the C-module, as well as through WCs and the maintenance room, to go through the heat exchanger. Air flows are dimensioned according to the needs of the project.

Load-bearing system

C40 RED are dimensioned for up to three floors. The roof structure has strong gluebeams, the length of the modules and the modules are therefore free of load-bearing inner walls. Between the main gluebeams are secondary beams. Gluebeam pillars at corners transfer loads to the foundation or the floor below. The floor substructure is constructed of wooden beams. The floor is reinforced with steel UNP profiles along the bottom perimeter. Modules are provided with lifting attachments on top. Allowed for use in snow zone 3.

Lighting

Lighting is dimensioned for a level of 350-500 lux. All rooms have up and downlight through fluorescent tube armatures with pull switches, 220 cm above floor HF equipment for T5 energy tubes, 3 x 28 W. Corridors have recessed fluorescent lighting, 1 x 28 W/T5. The HWC has a movement detection device and energy-saving bulbs. Maintenance and technology rooms have energy-saving bulbs.

Heating

Thermostat-equipped electric radiators. Heating can also be performed through a water-borne system with radiators under the windows. The standard heat source is an air-to-water heat pump, but district heating (secondary) or a pellet burner are also possible heat sources.

Foundation

The foundation is laid on wooden pressure plates and shim frames. Alternatively, concrete tiles and Leca blocks can be used.

Fire protection

The modules are constructed of a pre-assembled wooden framework, with EI 60 walls and ceiling. The bearing structure is R60 with 60 minutes fire protection system. The surfaces of corridors and evacuation routes have a class I flameproof coating. The exterior surface is made of class 1 material. Evacuation is done through designated evacuation routes or openable windows. If a second or a third floor is added, outer evacuation steel staircases can be installed.

Electrical installations

General. The group central has automatic fuses for lighting and heating, type KB system (Dynamic Workplace Power). Four grounded electric outlets are placed on each outer wall of a module.

Other

Environmental verification and classification. All materials used in the construction of C40 modules are verified against a national Swedish environmental data base of construction material, a system that connects to the SS-EN 14001 environmental certification. This facilitates a process of continuous improvement.

Cooling

A cooling system that lowers the temperature of in-going air is optional. Dimensioned after the needs of the project.

Enquiry